CentOS 6.10 dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-754.24.3.el6.x86_64 (mockbuild@x86-02.bsys.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-23) (GCC) ) #1 SMP Thu Nov 14 15:35:16 UTC 2019
Command line: ro root=UUID=d318bfc5-68d3-4037-a59d-431c25dfab23 rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD LANG=zh_CN.UTF-8 rd_NO_LVM rd_NO_DM rhgb quiet crashkernel=auto
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000009d00000 (usable)
BIOS-e820: 0000000009d00000 - 000000000a000000 (reserved)
BIOS-e820: 000000000a000000 - 000000000a200000 (usable)
BIOS-e820: 000000000a200000 - 000000000a20b000 (ACPI NVS)
BIOS-e820: 000000000a20b000 - 00000000bacec000 (usable)
BIOS-e820: 00000000bacec000 - 00000000bc1ad000 (reserved)
BIOS-e820: 00000000bc1ad000 - 00000000bc32c000 (usable)
BIOS-e820: 00000000bc32c000 - 00000000bc735000 (ACPI NVS)
BIOS-e820: 00000000bc735000 - 00000000bcfb7000 (reserved)
BIOS-e820: 00000000bcfb7000 - 00000000bf000000 (usable)
BIOS-e820: 00000000bf000000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fd000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000081f340000 (usable)
SMBIOS version 3.2 @ 0xF05D0
SMBIOS 3.2 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A300M-STX, BIOS P3.50 05/15/2019
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x81f340 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bf000000
0000000000 - 0080000000 page 1G
0080000000 - 00bf000000 page 2M
kernel direct mapping tables up to bf000000 @ 10000-12000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-000000081f340000
0100000000 - 0800000000 page 1G
0800000000 - 081f200000 page 2M
081f200000 - 081f340000 page 4k
kernel direct mapping tables up to 81f340000 @ 11000-14000
RAMDISK: 08441000 - 09cef166
ACPI: Deleted _OSI(Windows 2012)
ACPI: Deleted _OSI(Windows 2013)
ACPI: RSDP 00000000000f05a0 00024 (v02 ALASKA)
ACPI: XSDT 00000000bc6b10a0 000BC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bc6b7ae0 00114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bc6b11f0 068EC (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 00000000bc71de00 00040
ACPI: APIC 00000000bc6b7bf8 0015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000bc6b7d58 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 00000000bc6b7da0 0009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bc6b7e40 00046 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: SSDT 00000000bc6b7e88 05419 (v02 AMD AmdTable 00000002 MSFT 02000002)
ACPI: SSDT 00000000bc6bd2a8 0307E (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 00000000bc6c0328 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT 00000000bc6c0368 003EA (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 00000000bc6c0758 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: UEFI 00000000bc6c0790 00042 (v01 ALASKA A M I 00000002 01000013)
ACPI: IVRS 00000000bc6c07d8 000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 00000000bc6c08a8 00400 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 00000000bc6c0ca8 00490 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 00000000bc6c1138 00029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 00000000bc6c1168 00C34 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 00000000bc6c1da0 010AC (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 00000000bc6c2e50 01D4A (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: WSMT 00000000bc6c4ba0 00028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-000000081f340000
Bootmem setup node 0 0000000000000000-000000081f340000
NODE_DATA [0000000000013000 - 0000000000046fff]
bootmap [0000000000100000 - 0000000000203e67] pages 104
(8 early reservations) ==> bootmem [0000000000 - 081f340000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002052a64] TEXT DATA BSS ==> [0001000000 - 0002052a64]
#3 [0008441000 - 0009cef166] RAMDISK ==> [0008441000 - 0009cef166]
#4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
#5 [0002053000 - 00020531e5] BRK ==> [0002053000 - 00020531e5]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000011000 - 0000013000] PGTABLE ==> [0000011000 - 0000013000]
Found 131MB of memory at 176MB for crashkernel auto
Reserving 131MB of memory at 176MB for crashkernel (System RAM: 33267MB)
[ffffea0000000000-ffffea001c7fffff] PMD -> [ffff880028600000-ffff880043ffffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0081f340
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x00009d00
0: 0x0000a000 -> 0x0000a200
0: 0x0000a20b -> 0x000bacec
0: 0x000bc1ad -> 0x000bc32c
0: 0x000bcfb7 -> 0x000bf000
0: 0x00100000 -> 0x0081f340
On node 0 totalpages: 8240758
DMA zone: 56 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3821 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 754657 pages, LIFO batch:31
Normal zone: 102100 pages used for memmap
Normal zone: 7365740 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x04] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 4, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
SMP: Allowing 32 CPUs, 30 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000009d00000 - 000000000a000000
PM: Registered nosave memory: 000000000a200000 - 000000000a20b000
PM: Registered nosave memory: 00000000bacec000 - 00000000bc1ad000
PM: Registered nosave memory: 00000000bc32c000 - 00000000bc735000
PM: Registered nosave memory: 00000000bc735000 - 00000000bcfb7000
PM: Registered nosave memory: 00000000bf000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fd000000
PM: Registered nosave memory: 00000000fd000000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff880044000000 s104088 r8192 d22888 u262144
pcpu-alloc: s104088 r8192 d22888 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8124218
Policy zone: Normal
Kernel command line: ro root=UUID=d318bfc5-68d3-4037-a59d-431c25dfab23 rd_NO_LUKS KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD LANG=zh_CN.UTF-8 rd_NO_LVM rd_NO_DM rhgb quiet crashkernel=131M@176M
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled eager FPU xstate_bv 0x7, cntxt size 0x340
AMD-Vi disabled by default: pass amd_iommu=on to enable
Memory: 32263484k/34065664k available (5540k kernel code, 1102632k absent, 699548k reserved, 6890k data, 1348k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1208
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 132120576 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3199.848 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.69 BogoMIPS (lpj=3199848)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
tseg: 00bf000000
mce: CPU supports 23 MCE banks
using mwait in idle threads.
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
FEATURE SPEC_CTRL Not Present
FEATURE IBPB_SUPPORT Present
Spectre V1 : Mitigation: Load fences, usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22099 entries in 87 pages
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon 200GE with Radeon Vega Graphics stepping 00
Performance Events:
core perfctr but no constraints; unknown hardware!
no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (12799.39 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at a200000 (45056 bytes)
PM: Registering ACPI NVS region at bc32c000 (4231168 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfec2ffff]
pci_root PNP0A08:00: host bridge window [mem 0xfee00000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff]
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:01.6: PME# supported from D0 D3hot D3cold
pci 0000:00:01.6: PME# disabled
pci 0000:00:01.7: PME# supported from D0 D3hot D3cold
pci 0000:00:01.7: PME# disabled
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PME# disabled
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: PME# disabled
pci 0000:00:01.1: PCI bridge to [bus 01-01]
pci 0000:02:00.0: reg 10: [mem 0xfcf00000-0xfcf7ffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xfcf80000-0xfcf8ffff pref]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:00:01.6: PCI bridge to [bus 02-02]
pci 0000:00:01.6: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:03:00.0: reg 10: [io 0xf000-0xf0ff]
pci 0000:03:00.0: reg 18: [mem 0xfce04000-0xfce04fff 64bit]
pci 0000:03:00.0: reg 20: [mem 0xfce00000-0xfce03fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:01.7: PCI bridge to [bus 03-03]
pci 0000:00:01.7: bridge window [io 0xf000-0xffff]
pci 0000:00:01.7: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:04:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:04:00.0: reg 18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:04:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:04:00.0: reg 24: [mem 0xfcc00000-0xfcc7ffff]
pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:04:00.1: reg 10: [mem 0xfcc88000-0xfcc8bfff]
pci 0000:04:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:00.1: PME# disabled
pci 0000:04:00.2: reg 18: [mem 0xfcb00000-0xfcbfffff]
pci 0000:04:00.2: reg 24: [mem 0xfcc8c000-0xfcc8dfff]
pci 0000:04:00.3: reg 10: [mem 0xfca00000-0xfcafffff 64bit]
pci 0000:04:00.3: PME# supported from D0 D3hot D3cold
pci 0000:04:00.3: PME# disabled
pci 0000:04:00.4: reg 10: [mem 0xfc900000-0xfc9fffff 64bit]
pci 0000:04:00.4: PME# supported from D0 D3hot D3cold
pci 0000:04:00.4: PME# disabled
pci 0000:04:00.6: reg 10: [mem 0xfcc80000-0xfcc87fff]
pci 0000:04:00.6: PME# supported from D0 D3hot D3cold
pci 0000:04:00.6: PME# disabled
pci 0000:00:08.1: PCI bridge to [bus 04-04]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfccfffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:05:00.0: reg 24: [mem 0xfcd00000-0xfcd007ff]
pci 0000:05:00.0: PME# supported from D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:08.2: PCI bridge to [bus 05-05]
pci 0000:00:08.2: bridge window [mem 0xfcd00000-0xfcdfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GPP6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GP17._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GP18._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xf8000000-0xfbffffff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [mem 0xfeb80000-0xfebfffff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [mem 0xfd100000-0xfd1fffff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 4]
pnp 00:05: [io 0x0000-0x000f]
pnp 00:05: [io 0x0081-0x0083]
pnp 00:05: [io 0x0087]
pnp 00:05: [io 0x0089-0x008b]
pnp 00:05: [io 0x008f]
pnp 00:05: [io 0x00c0-0x00df]
pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:06: [io 0x0070-0x0071]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0061]
pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0280-0x028f]
pnp 00:08: [io 0x0290-0x029f]
pnp 00:08: [io 0x02a0-0x02af]
pnp 00:08: [io 0x02b0-0x02bf]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x03f8-0x03ff]
pnp 00:09: [irq 4]
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io 0x0010-0x001f]
pnp 00:0a: [io 0x0022-0x003f]
pnp 00:0a: [io 0x0063]
pnp 00:0a: [io 0x0065]
pnp 00:0a: [io 0x0067-0x006f]
pnp 00:0a: [io 0x0072-0x007f]
pnp 00:0a: [io 0x0080]
pnp 00:0a: [io 0x0084-0x0086]
pnp 00:0a: [io 0x0088]
pnp 00:0a: [io 0x008c-0x008e]
pnp 00:0a: [io 0x0090-0x009f]
pnp 00:0a: [io 0x00a2-0x00bf]
pnp 00:0a: [io 0x00b1]
pnp 00:0a: [io 0x00e0-0x00ef]
pnp 00:0a: [io 0x04d0-0x04d1]
pnp 00:0a: [io 0x040b]
pnp 00:0a: [io 0x04d6]
pnp 00:0a: [io 0x0c00-0x0c01]
pnp 00:0a: [io 0x0c14]
pnp 00:0a: [io 0x0c50-0x0c51]
pnp 00:0a: [io 0x0c52]
pnp 00:0a: [io 0x0c6c]
pnp 00:0a: [io 0x0c6f]
pnp 00:0a: [io 0x0cd0-0x0cd1]
pnp 00:0a: [io 0x0cd2-0x0cd3]
pnp 00:0a: [io 0x0cd4-0x0cd5]
pnp 00:0a: [io 0x0cd6-0x0cd7]
pnp 00:0a: [io 0x0cd8-0x0cdf]
pnp 00:0a: [io 0x0800-0x089f]
pnp 00:0a: [io 0x0b00-0x0b0f]
pnp 00:0a: [io 0x0b20-0x0b3f]
pnp 00:0a: [io 0x0900-0x090f]
pnp 00:0a: [io 0x0910-0x091f]
pnp 00:0a: [io 0x0060-0x005f disabled]
pnp 00:0a: [io 0x0064-0x0063 disabled]
pnp 00:0a: [mem 0xfec00000-0xfec00fff]
pnp 00:0a: [mem 0xfec01000-0xfec01fff]
pnp 00:0a: [mem 0xfedc0000-0xfedc0fff]
pnp 00:0a: [mem 0xfee00000-0xfee00fff]
pnp 00:0a: [mem 0xfed80000-0xfed8ffff]
pnp 00:0a: [mem 0xfec10000-0xfec10fff]
pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:0a: [mem 0xff000000-0xffffffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:02: [mem 0xfeb80000-0xfebfffff] has been reserved
system 00:04: [mem 0xfd100000-0xfd1fffff] has been reserved
system 00:08: [io 0x0280-0x028f] has been reserved
system 00:08: [io 0x0290-0x029f] has been reserved
system 00:08: [io 0x02a0-0x02af] has been reserved
system 00:08: [io 0x02b0-0x02bf] has been reserved
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x040b] has been reserved
system 00:0a: [io 0x04d6] has been reserved
system 00:0a: [io 0x0c00-0x0c01] has been reserved
system 00:0a: [io 0x0c14] has been reserved
system 00:0a: [io 0x0c50-0x0c51] has been reserved
system 00:0a: [io 0x0c52] has been reserved
system 00:0a: [io 0x0c6c] has been reserved
system 00:0a: [io 0x0c6f] has been reserved
system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
system 00:0a: [io 0x0800-0x089f] has been reserved
system 00:0a: [io 0x0b00-0x0b0f] has been reserved
system 00:0a: [io 0x0b20-0x0b3f] has been reserved
system 00:0a: [io 0x0900-0x090f] has been reserved
system 00:0a: [io 0x0910-0x091f] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:0a: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
pci 0000:00:01.1: bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000
pci 0000:00:01.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
pci 0000:00:01.1: bridge window [mem 0x00100000-0x000fffff] to [bus 01-01] add_size 200000
pci 0000:00:01.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:01.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:01.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:01.1: BAR 14: assigned [mem 0xf0200000-0xf03fffff]
pci 0000:00:01.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:01.1: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.1: PCI bridge to [bus 01-01]
pci 0000:00:01.1: bridge window [io 0x1000-0x1fff]
pci 0000:00:01.1: bridge window [mem 0xf0200000-0xf03fffff]
pci 0000:00:01.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
pci 0000:00:01.6: PCI bridge to [bus 02-02]
pci 0000:00:01.6: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:01.7: PCI bridge to [bus 03-03]
pci 0000:00:01.7: bridge window [io 0xf000-0xffff]
pci 0000:00:01.7: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:00:08.1: PCI bridge to [bus 04-04]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfccfffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:08.2: PCI bridge to [bus 05-05]
pci 0000:00:08.2: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:00:01.1: setting latency timer to 64
pci 0000:00:01.6: setting latency timer to 64
pci 0000:00:01.7: setting latency timer to 64
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
pci 0000:00:08.1: PCI INT A -> GSI 43 (level, low) -> IRQ 43
pci 0000:00:08.1: setting latency timer to 64
pci 0000:00:08.2: PCI INT A -> GSI 43 (level, low) -> IRQ 43
pci 0000:00:08.2: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf03fffff]
pci_bus 0000:01: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfce00000-0xfcefffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfc900000-0xfccfffff]
pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfcd00000-0xfcdfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:04:00.0: Boot video device
alloc irq_desc for 55 on node -1
alloc kstat_irqs on node -1
pci 0000:04:00.3: PCI INT D -> GSI 55 (level, low) -> IRQ 55
pci 0000:04:00.3: PCI INT D disabled
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
pci 0000:04:00.4: PCI INT A -> GSI 52 (level, low) -> IRQ 52
pci 0000:04:00.4: PCI INT A disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25272k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
perf: AMD NB counters detected
perf: AMD L2I counters detected
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1576548514.646:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key C01BF629344D4672
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.1: setting latency timer to 64
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.1: irq 56 for MSI/MSI-X
pcieport 0000:00:01.6: setting latency timer to 64
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.6: irq 57 for MSI/MSI-X
pcieport 0000:00:01.7: setting latency timer to 64
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.7: irq 58 for MSI/MSI-X
pcieport 0000:00:08.1: setting latency timer to 64
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:08.1: irq 59 for MSI/MSI-X
pcieport 0000:00:08.2: setting latency timer to 64
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:08.2: irq 60 for MSI/MSI-X
aer 0000:00:01.1:pcie02: service driver aer loaded
aer 0000:00:01.6:pcie02: service driver aer loaded
aer 0000:00:01.7:pcie02: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:01.1:pcie04: HPC vendor_id 1022 device_id 15d3 ss_vid 0 ss_did 0
pciehp 0000:00:01.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:06: setting system clock to 2019-12-17 02:08:36 UTC (1576548516)
Initalizing network drop monitor service
Freeing unused kernel memory: 1348k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 584k freed
Freeing unused kernel memory: 1520k freed
dracut: dracut-004-411.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0e/LNXVIDEO:01/input/input3
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ahci 0000:05:00.0: version 3.0
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
ahci 0000:05:00.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
ahci 0000:05:00.0: irq 61 for MSI/MSI-X
ahci 0000:05:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
ahci 0000:05:00.0: setting latency timer to 64
scsi0 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfcd00000 port 0xfcd00100 irq 61
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: TOSHIBA THNSNJ128GCSU, JURA0101, max UDMA/100
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSNJ12 0101 PQ: 0 ANSI: 5
Refined TSC clocksource calibration: 3202.798 MHz.
Switching to clocksource tsc
xhci_hcd 0000:04:00.3: PCI INT D -> GSI 55 (level, low) -> IRQ 55
xhci_hcd 0000:04:00.3: setting latency timer to 64
xhci_hcd 0000:04:00.3: xHCI Host Controller
xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 1
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:04:00.3: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:04:00.3: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:04:00.3: irq 64 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-754.24.3.el6.x86_64 xhci_hcd
usb usb1: SerialNumber: 0000:04:00.3
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:04:00.3: xHCI Host Controller
xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 2
usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-754.24.3.el6.x86_64 xhci_hcd
usb usb2: SerialNumber: 0000:04:00.3
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:04:00.4: PCI INT A -> GSI 52 (level, low) -> IRQ 52
xhci_hcd 0000:04:00.4: setting latency timer to 64
xhci_hcd 0000:04:00.4: xHCI Host Controller
xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 3
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:04:00.4: irq 65 for MSI/MSI-X
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:04:00.4: irq 66 for MSI/MSI-X
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
xhci_hcd 0000:04:00.4: irq 67 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-754.24.3.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:04:00.4
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci_hcd 0000:04:00.4: xHCI Host Controller
xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-754.24.3.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:04:00.4
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=05e3, idProduct=0612
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB3.0 Hub
usb 2-2: Manufacturer: GenesysLogic
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
usb 1-2: new high speed USB device number 2 using xhci_hcd
usb 1-2: New USB device found, idVendor=05e3, idProduct=0610
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
usb 1-2: Manufacturer: GenesysLogic
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-3: new high speed USB device number 3 using xhci_hcd
usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3: Product: USB2.0 Hub
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 3-1: new full speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=062a, idProduct=4101
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: 2.4G Keyboard Mouse
usb 3-1: Manufacturer: MOSART Semi.
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1:1.0/input/input4
generic-usb 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:04:00.4-1/input0
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1:1.1/input/input5
generic-usb 0003:062A:4101.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:04:00.4-1/input1
usb 2-2.4: new SuperSpeed USB device number 3 using xhci_hcd
usb 2-2.4: New USB device found, idVendor=152d, idProduct=0578
usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2.4: Product: External USB 3.0
usb 2-2.4: Manufacturer: JMicron
usb 2-2.4: SerialNumber: 201703310007F
usb 2-2.4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-3.1: new full speed USB device number 4 using xhci_hcd
usb 1-3.1: New USB device found, idVendor=0cf3, idProduct=e006
usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-3.1: configuration #1 chosen from 1 choice
usb-storage: device scan complete
scsi 1:0:0:0: Direct-Access External USB3.0 0204 PQ: 0 ANSI: 6
sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 47 00 00 08
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/sdb1
dracut: Loading SELinux policy
type=1404 audit(1576548519.574:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 309333 rules.
SELinux: 2048 avtab hash slots, 309333 rules.
SELinux: 9 users, 12 roles, 4215 types, 237 bools, 1 sens, 1024 cats
SELinux: 81 classes, 309333 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sdb1, type ext4), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1576548520.185:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
ath9k 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
ath9k 0000:02:00.0: setting latency timer to 64
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: ath9k-phy0
ieee80211 phy0: Atheros AR9462 Rev:3 mem=0xffffc90008e80000, irq=44
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:04:00.1: PCI INT B -> GSI 53 (level, low) -> IRQ 53
snd_hda_intel 0000:04:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:04:00.1: setting latency timer to 64
snd_hda_intel 0000:04:00.6: PCI INT C -> GSI 54 (level, low) -> IRQ 54
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
r8169 0000:03:00.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
r8169 0000:03:00.0: setting latency timer to 64
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
r8169 0000:03:00.0: irq 68 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168h/8111h at 0xffffc90008f94000, 70:85:c2:b7:04:b3, XID 14100800 IRQ 68
r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input6
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input7
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input8
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input9
snd_hda_intel 0000:04:00.6: setting latency timer to 64
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
Bluetooth: Core ver 2.15
sound hdaudioC1D0: autoconfig for ALC233: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Mic=0x1a
sound hdaudioC1D0: Mic=0x19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input10
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input11
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input12
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input13
platform microcode: firmware: requesting amd-ucode/microcode_amd_fam17h.bin
microcode: CPU0: patch_level=0x8101013
section size mismatch
microcode: CPU1: patch_level=0x8101013
section size mismatch
Microcode Update Driver: v2.00
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
cfg80211: Regulatory domain changed to country: CN
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
type=1305 audit(1576519723.668:4): audit_pid=2082 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
powernow-k8: Found 1 AMD Athlon 200GE with Radeon Vega Graphics (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (3200 MHz)
powernow-k8: 1 : pstate 1 (2300 MHz)
powernow-k8: 2 : pstate 2 (1600 MHz)
vboxdrv: Found 2 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3202795923 Hz
vboxdrv: Successfully loaded version 5.2.32 (interface 0x00290001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not compiled)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
802.1Q VLAN Support v1.8 Ben Greear
All bugs added by David S. Miller
r8169 0000:03:00.0: firmware: requesting rtl_nic/rtl8168h-2.fw
r8169 0000:03:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
snd_hda_intel 0000:04:00.1: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
fuse init (API version 7.14)
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sdb3, type ext4), uses xattr
EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sdb4, type ext4), uses xattr
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sdb2, type ext4), uses xattr
wlan0: authenticate with 34:bd:f9:c5:11:68
wlan0: send auth to 34:bd:f9:c5:11:68 (try 1/3)
wlan0: authenticated
wlan0: associate with 34:bd:f9:c5:11:68 (try 1/3)
wlan0: RX AssocResp from 34:bd:f9:c5:11:68 (capab=0x11 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ath: regdomain 0x809c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CN
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
cryptd: max_cpu_qlen set to 100
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
padlock: VIA PadLock not detected.
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
wlan0: no IPv6 routers present
EXT4-fs (sda4): recovery complete
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda4, type ext4), uses xattr
SUPR0GipMap: fGetGipCpu=0xb
vboxdrv: ffffffffa0872020 VMMR0.r0
vboxdrv: ffffffffa0996020 VBoxDDR0.r0
VBoxNetFlt: attached to 'wlan0' / 4c:bb:58:ae:b1:d4
vboxdrv: ffffffffa09b9020 VBoxEhciR0.r0
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HDA: Disabled DMA position buffer
HDA: Enabled DMA position buffer
EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda3, type ext4), uses xattr
HDA: Disabled DMA position buffer
HPET: Using timer above configured range: 3
vboxnetflt: 0 out of 77209 packets were not sent (directed to host)
vboxdrv: ffffffffa09bc020 VMMR0.r0
vboxdrv: ffffffffa0ae0020 VBoxDDR0.r0
VBoxNetFlt: attached to 'wlan0' / 4c:bb:58:ae:b1:d4
vboxdrv: ffffffffa0b03020 VBoxEhciR0.r0
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HDA: Disabled DMA position buffer
HDA: Enabled DMA position buffer
usb 2-2.1: new SuperSpeed USB device number 4 using xhci_hcd
usb 2-2.1: New USB device found, idVendor=2537, idProduct=1066
usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2.1: Product: NS1066
usb 2-2.1: Manufacturer: Norelsys
usb 2-2.1: SerialNumber: 0123456789ABCDE
usb 2-2.1: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM250HI 01C4 PQ: 0 ANSI: 6
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with ordered data mode
SELinux: initialized (dev sdc1, type ext3), uses xattr
usb 2-2.1: USB disconnect, device number 4
usb 2-2.1: new SuperSpeed USB device number 5 using xhci_hcd
usb 2-2.1: New USB device found, idVendor=174c, idProduct=55aa
usb 2-2.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2.1: Product: ASMT1053
usb 2-2.1: Manufacturer: asmedia
usb 2-2.1: SerialNumber: 123456789012
usb 2-2.1: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 3:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] Spinning up disk.........ready
sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2 sdc3 sdc4
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sd 3:0:0:0: [sdc] Attached SCSI disk
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
SELinux: initialized (dev sdc3, type ext2), uses xattr
EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sdc4, type ext4), uses xattr
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
SELinux: initialized (dev sdc2, type ext2), uses xattr
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sdc1, type ext4), uses xattr
HDA: Disabled DMA position buffer
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HDA: Disabled DMA position buffer
HDA: Enabled DMA position buffer
HDA: Disabled DMA position buffer
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HDA: Disabled DMA position buffer
HDA: Enabled DMA position buffer
HDA: Disabled DMA position buffer
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HDA: Disabled DMA position buffer
HDA: Enabled DMA position buffer
HDA: Disabled DMA position buffer
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HDA: Disabled DMA position buffer
HDA: Enabled DMA position buffer
HDA: Disabled DMA position buffer
HPET: Using timer above configured range: 3
vboxnetflt: 0 out of 14514 packets were not sent (directed to host)
usb 2-2.1: USB disconnect, device number 5
vboxdrv: ffffffffa0b89020 VMMR0.r0
vboxdrv: ffffffffa0cad020 VBoxDDR0.r0
VBoxNetFlt: attached to 'wlan0' / 4c:bb:58:ae:b1:d4
vboxdrv: ffffffffa0cd0020 VBoxEhciR0.r0
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HDA: Disabled DMA position buffer
HDA: Enabled DMA position buffer
HDA: Disabled DMA position buffer
HPET: Using timer above configured range: 3
vboxnetflt: 0 out of 36296 packets were not sent (directed to host)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda4, type ext4), uses xattr
EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda3, type ext4), uses xattr
EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sdb4, type ext4), uses xattr
vboxdrv: ffffffffa0cd3020 VMMR0.r0
vboxdrv: ffffffffa0df7020 VBoxDDR0.r0
VBoxNetFlt: attached to 'wlan0' / 4c:bb:58:ae:b1:d4
vboxdrv: ffffffffa0e1a020 VBoxEhciR0.r0
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HDA: Disabled DMA position buffer
HDA: Enabled DMA position buffer
HDA: Disabled DMA position buffer
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HDA: Disabled DMA position buffer
HDA: Enabled DMA position buffer
usb 1-2.3: new high speed USB device number 5 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=12d1, idProduct=107f
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.3: Product: KSA-AL00
usb 1-2.3: Manufacturer: HUAWEI
usb 1-2.3: SerialNumber: 5CDNU19729302234
usb 1-2.3: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 4:0:0:0: CD-ROM Linux File-CD Gadget 0409 PQ: 0 ANSI: 2
scsi 4:0:0:0: Attached scsi generic sg2 type 5
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
cdrom: This disc doesn't have any tracks I recognize!
HDA: Disabled DMA position buffer
HPET: Using timer above configured range: 3
vboxnetflt: 0 out of 12472 packets were not sent (directed to host)
vboxdrv: ffffffffa0870020 VMMR0.r0
vboxdrv: ffffffffa0226020 VBoxDDR0.r0
VBoxNetFlt: attached to 'wlan0' / 4c:bb:58:ae:b1:d4
vboxdrv: ffffffffa001b020 VBoxEhciR0.r0
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HPET: Using timer above configured range: 3
HDA: Disabled DMA position buffer
HDA: Enabled DMA position buffer
HDA: Disabled DMA position buffer
HPET: Using timer above configured range: 3
vboxnetflt: 0 out of 45827 packets were not sent (directed to host)